Separate papers from everyday desk supplies with this geometric organizer. Upright upper bays keep slim notebooks together, while two lower cubbies provide space for flat items.
The open layout keeps frequently used pieces in view without enclosing the desk. Angular cutouts add interest to the white panels, making the organizer suitable for a study table or home office.
Features
- Three upright upper bays
- Two lower horizontal cubbies
- Pattern 1 geometric cutout panels
- Freestanding desktop layout
Specifications
Brand: SS ARTS
Colour: White
Material thickness: 8 mm
Product code: B07FXSBJYK
Overall size: 40 × 21 × 30 cm (W × D × H)
Care
- Dust gently with a soft, dry microfibre cloth, including the cutout edges.
- Follow the supplied care label; avoid soaking, abrasive pads and solvent cleaners.
- Keep away from direct heat and prolonged moisture.
- Empty before moving and support the base and solid panels instead of lifting by cutouts.
Installation and placement
Assemble according to the supplied instructions on a protected surface. Place on a firm, level surface, check all joins and stabilise or anchor as directed by the manufacturer. Keep heavier contents low and distribute loads evenly.
Frequently asked questions
Will full-size document folders fit?
Compare the folder dimensions with the usable bay width and depth before buying. The overall 40 × 21 × 30 cm size does not specify every internal compartment.
What is the overall size?
The listed size is 40 × 21 × 30 cm (W × D × H). Check the current product and available space before ordering.
Are the items shown on the shelves included?
No. Books, bottles, plants and decorative accessories shown in styled images are display props. This listing is for the organizer or shelf unit.
How should I clean it?
Use a soft, dry cloth and follow the supplied care instructions. Clean cutouts gently; avoid soaking, abrasives and harsh solvents.
How much weight can it hold?
Follow the supplied load guidance and check with the store before using heavy items.
Does it need assembly or mounting?
Assemble according to the supplied instructions on a protected surface. Place on a firm, level surface, check all joins and stabilise or anchor as directed by the manufacturer. Keep heavier contents low and distribute loads evenly.
Shelves & Storage Buying and Fitting Guide
This is a ready-made SS ARTS piece, supplied in the size, colour and finish shown on this product page. It is not made to order. Read the product-specific dimensions above before ordering.
Measure Before Ordering
- The dimensions listed are overall external measurements. Usable internal space is smaller.
- For wall-mounted pieces, check the clear wall run and leave space either side so the piece does not look wedged in.
- For router and set-top stands, measure your device including plugs and antenna clearance, not just the body.
- For bedside cabinets, match the height to your mattress top within about 5 cm.
Mounting and Placement
Follow the supplied assembly and mounting instructions. Check your wall type and use the correct anchor for it — solid brick and concrete take standard anchors, hollow drywall and partition board need cavity fixings, and anything loaded with books should be fixed into a stud. Position the piece empty and level, secure it as directed, then check stability before adding anything. Placement photographs are illustrations, not drilling templates.
Material and Load
Every piece in this range is made from 8 mm PVC foam board. That is what makes it light, moisture-resistant and easy to fix to a wall, and it is why the white finish stays consistent across the range. It is a display-weight material, not a structural one.
Suitable for frames, small ornaments, lightweight faux plants, toiletries, remotes, routers and a few paperbacks. Not suitable for rows of hardbacks, stacked crockery, tools, or anything heavy — and this applies to the floor-standing bookcases and stands as much as the wall-mounted shelves, because the load limit comes from the board itself, not from how the piece is supported. If you need to carry real weight, this is not the right range, and we would rather say so now than replace a shelf later.
Care Instructions
- Dust with a soft, dry microfibre cloth, including into the cutout edges.
- For a mark, use a barely damp cloth and dry immediately.
- Avoid abrasive pads, solvents, soaking, direct heat and prolonged sunlight.
- Remove contents before moving. Support solid panels and the base; do not lift by decorative cutouts.
Delivery
SS ARTS packs and ships across India from Ujire, Dakshina Kannada, with tracking on every order. As these are stock pieces rather than custom cut work, dispatch is 1-3 working days, and delivery is 3-5 working days.
Styling note: Plants, books, toiletries, lamps and electronic devices in the photographs illustrate scale and placement. They are not included with this item. Screen settings and lighting can also create small differences in how the white finish appears.
House Name Plates
Office Sign Boards
PVC Jaali Design
PVC Roof Borders
PVC Gable Jaali
Corporate Gifts
Wall Art
Wall Clocks
Number Plates
Diwali Decorations
Shelves & Storage
Reviews
There are no reviews yet.