Organise a small router or set-top box setup with this white SS ARTS stand. Its two-level form and distinctive car-shaped side panels create separate surfaces within a compact footprint.
Use it to give compatible devices a defined place near a TV or workspace. The source imagery also shows a wall-mounted arrangement. Check device size, cable clearance and the supplied installation guidance before choosing between tabletop placement and wall mounting.
Features
- Two horizontal device platforms
- Distinctive car-outline side panels
- Open side areas around compatible devices
- Compact white stand for a media or workspace setup
Specifications
- Brand
- SS ARTS
- Colour
- White
- Product code
- B07FTGCBV4
- Overall dimensions
- 24 cm wide × 22 cm deep × 15 cm high; listed dimensions
Care
- Dust with a soft, dry microfibre cloth, including the cutout edges.
- For a small mark, use a barely damp cloth and dry immediately; follow the supplied care instructions.
- Avoid abrasive pads, solvents, soaking, direct heat and prolonged sunlight.
- Remove contents before moving. Support solid panels and the base; do not lift by decorative cutouts.
Installation and placement
Follow the supplied assembly and mounting instructions. Check wall suitability and use the correct anchors for that wall. Position the empty product level, secure it as directed, and check stability before adding items. The placement photo is an illustration, not a drilling template.
Frequently asked questions
Does it include a router or set-top box?
The listing is for the stand. Electronic devices shown illustrate placement.
Does every device fit?
No. Check the device footprint, height, connectors and ventilation clearance against the usable shelf space.
Can it be wall mounted?
The source photos show a wall-mounted setup. Follow the product's mounting guidance and use fixings suitable for the actual wall.
What are the overall dimensions?
24 cm wide × 22 cm deep × 15 cm high; listed dimensions. These are source-listed measurements; usable internal space is smaller.
How should I clean it?
Use a soft dry cloth for routine dusting. Avoid abrasive cleaners and soaking. Follow the care instructions provided with the item.
Are styling accessories included?
Plants, books, toiletries, lamps and electronic devices in the photographs illustrate styling and placement. They are not part of this furniture listing.
Shelves & Storage Buying and Fitting Guide
This is a ready-made SS ARTS piece, supplied in the size, colour and finish shown on this product page. It is not made to order. Read the product-specific dimensions above before ordering.
Measure Before Ordering
- The dimensions listed are overall external measurements. Usable internal space is smaller.
- For wall-mounted pieces, check the clear wall run and leave space either side so the piece does not look wedged in.
- For router and set-top stands, measure your device including plugs and antenna clearance, not just the body.
- For bedside cabinets, match the height to your mattress top within about 5 cm.
Mounting and Placement
Follow the supplied assembly and mounting instructions. Check your wall type and use the correct anchor for it — solid brick and concrete take standard anchors, hollow drywall and partition board need cavity fixings, and anything loaded with books should be fixed into a stud. Position the piece empty and level, secure it as directed, then check stability before adding anything. Placement photographs are illustrations, not drilling templates.
Material and Load
Every piece in this range is made from 8 mm PVC foam board. That is what makes it light, moisture-resistant and easy to fix to a wall, and it is why the white finish stays consistent across the range. It is a display-weight material, not a structural one.
Suitable for frames, small ornaments, lightweight faux plants, toiletries, remotes, routers and a few paperbacks. Not suitable for rows of hardbacks, stacked crockery, tools, or anything heavy — and this applies to the floor-standing bookcases and stands as much as the wall-mounted shelves, because the load limit comes from the board itself, not from how the piece is supported. If you need to carry real weight, this is not the right range, and we would rather say so now than replace a shelf later.
Care Instructions
- Dust with a soft, dry microfibre cloth, including into the cutout edges.
- For a mark, use a barely damp cloth and dry immediately.
- Avoid abrasive pads, solvents, soaking, direct heat and prolonged sunlight.
- Remove contents before moving. Support solid panels and the base; do not lift by decorative cutouts.
Delivery
SS ARTS packs and ships across India from Ujire, Dakshina Kannada, with tracking on every order. As these are stock pieces rather than custom cut work, dispatch is 1-3 working days, and delivery is 3-5 working days.
Styling note: Plants, books, toiletries, lamps and electronic devices in the photographs illustrate scale and placement. They are not included with this item. Screen settings and lighting can also create small differences in how the white finish appears.
House Name Plates
Office Sign Boards
PVC Jaali Design
PVC Roof Borders
PVC Gable Jaali
Corporate Gifts
Wall Art
Wall Clocks
Number Plates
Diwali Decorations
Shelves & Storage
Reviews
There are no reviews yet.