Turn a small wall area into a decorative display with this white butterfly shelf. The sculpted butterfly silhouette frames one central ledge for a compact ornament, keepsake or miniature planter.
Mount it beside a mirror, above a console or on a feature wall and keep the display lightweight.
Features
- Butterfly-shaped silhouette
- Single central display ledge
- Curved wing cutout details
- Wall-mounted space-saving design
Specifications
Brand: SS ARTS
Colour: White
Material: PVC sheet
Material thickness: 8 mm
Source ASIN: B07FTHP6KV
Source-listed size: 36 × 13 × 28 cm (W × D × H)
Care instructions
- Dust with a soft, dry microfibre cloth, including cutout edges and joints.
- For marks, use a slightly damp cloth and dry immediately.
- Avoid soaking, standing water, abrasive pads, bleach, solvents and direct heat.
- Keep the assembled product indoors in a ventilated area and protect it from prolonged dampness.
- Empty before moving; support the base and solid panels instead of lifting by cutouts.
Assembly, installation and placement
Follow the supplied mounting instructions. Use fasteners and anchors suitable for the wall material and intended load, mount level and confirm the shelf is secure before adding an item. Do not use a photograph as a drilling template.
What can I display on the shelf?
Use it for a small, lightweight ornament within the supplied load guidance. Styled props are not included.
What is the product size?
The source-listed size is 36 × 13 × 28 cm (W × D × H). Measure the intended space and compare with current stock before ordering.
What material is it made from?
It is made from white PVC sheet with a material thickness of 8 mm, as confirmed by the product owner.
Are the styled props included?
No. Books, plants, lamps, baskets, toiletries and decorative objects are styling props. This listing covers the product.
How should I clean it?
Dust with a soft microfibre cloth. Use a slightly damp cloth for marks, dry immediately and avoid abrasives, bleach and solvent cleaners.
Does it need assembly or mounting, and what weight can it hold?
Follow the supplied mounting instructions. Use fasteners and anchors suitable for the wall material and intended load, mount level and confirm the shelf is secure before adding an item. Do not use a photograph as a drilling template. A verified load capacity was not available, so follow the supplied load guidance and avoid unverified heavy loads.
Shelves & Storage Buying and Fitting Guide
This is a ready-made SS ARTS piece, supplied in the size, colour and finish shown on this product page. It is not made to order. Read the product-specific dimensions above before ordering.
Measure Before Ordering
- The dimensions listed are overall external measurements. Usable internal space is smaller.
- For wall-mounted pieces, check the clear wall run and leave space either side so the piece does not look wedged in.
- For router and set-top stands, measure your device including plugs and antenna clearance, not just the body.
- For bedside cabinets, match the height to your mattress top within about 5 cm.
Mounting and Placement
Follow the supplied assembly and mounting instructions. Check your wall type and use the correct anchor for it — solid brick and concrete take standard anchors, hollow drywall and partition board need cavity fixings, and anything loaded with books should be fixed into a stud. Position the piece empty and level, secure it as directed, then check stability before adding anything. Placement photographs are illustrations, not drilling templates.
Material and Load
Every piece in this range is made from 8 mm PVC foam board. That is what makes it light, moisture-resistant and easy to fix to a wall, and it is why the white finish stays consistent across the range. It is a display-weight material, not a structural one.
Suitable for frames, small ornaments, lightweight faux plants, toiletries, remotes, routers and a few paperbacks. Not suitable for rows of hardbacks, stacked crockery, tools, or anything heavy — and this applies to the floor-standing bookcases and stands as much as the wall-mounted shelves, because the load limit comes from the board itself, not from how the piece is supported. If you need to carry real weight, this is not the right range, and we would rather say so now than replace a shelf later.
Care Instructions
- Dust with a soft, dry microfibre cloth, including into the cutout edges.
- For a mark, use a barely damp cloth and dry immediately.
- Avoid abrasive pads, solvents, soaking, direct heat and prolonged sunlight.
- Remove contents before moving. Support solid panels and the base; do not lift by decorative cutouts.
Delivery
SS ARTS packs and ships across India from Ujire, Dakshina Kannada, with tracking on every order. As these are stock pieces rather than custom cut work, dispatch is 1-3 working days, and delivery is 3-5 working days.
Styling note: Plants, books, toiletries, lamps and electronic devices in the photographs illustrate scale and placement. They are not included with this item. Screen settings and lighting can also create small differences in how the white finish appears.
House Name Plates
Office Sign Boards
PVC Jaali Design
PVC Roof Borders
PVC Gable Jaali
Corporate Gifts
Wall Art
Wall Clocks
Number Plates
Diwali Decorations
Shelves & Storage
Reviews
There are no reviews yet.